新增景区权限模块，集成 AMap CocoaPods 并支持模拟器

将景区选择与权限申请流程接入首页路由，集成高德 SDK 用于真机构建，并通过 Podfile post_install 钩子保证 arm64 模拟器可编译。

Co-authored-by: Cursor <cursoragent@cursor.com>

Pods/AMap3DMap-NO-IDFA/MAMapKit.framework/Headers/MAHeatMapVectorOverlay.h

@@ -0,0 +1,146 @@
+//
+//  MAHeatMapVectorOverlay.h
+//  MAMapKit
+//
+//  Created by ldj on 2019/7/25.
+//  Copyright © 2019 Amap. All rights reserved.
+//
+
+#import "MAConfig.h"
+#if MA_INCLUDE_OVERLAY_HEATMAP
+
+#import "MAShape.h"
+#import "MAOverlay.h"
+
+///热力图类型
+///Heatmap Type
+typedef NS_ENUM(NSInteger, MAHeatMapType)
+{
+    MAHeatMapTypeSquare      = 1,     ///< 网格热力图   Grid Heatmap
+    MAHeatMapTypeHoneycomb   = 2      ///< 蜂窝热力图   Hexagonal Heatmap
+};
+
+///单个点对象
+///Single Point Object
+@interface MAHeatMapVectorNode : NSObject
+
+///经纬度
+///Latitude and Longitude
+@property (nonatomic, assign) CLLocationCoordinate2D coordinate;
+
+///权重
+///Weight
+@property (nonatomic, assign) float weight;
+
+@end
+
+///热力图展示节点（用以描述一个蜂窝或一个网格）
+///Heatmap Display Node (used to describe a hexagon or a grid)
+@interface MAHeatMapVectorItem : NSObject
+
+///中心点坐标
+///Center Point Coordinates
+@property (nonatomic, readonly) MAMapPoint center;
+
+///当前热力值，求和后的权重
+///Current heat value, summed weight
+@property (nonatomic, readonly) float intensity;
+
+///落在此节点区域内的所有热力点的索引数组
+///Index array of all heat points within this node area
+@property (nonatomic, readonly) NSArray<NSNumber *> *nodeIndices;
+
+@end
+
+///该类用于定义热力图属性.
+///This class is used to define heatmap properties
+@interface MAHeatMapVectorOverlayOptions : NSObject
+
+///热力图类型 (默认为蜂窝类型MAHeatMapTypeHoneycomb)
+///Heatmap type (default is honeycomb type MAHeatMapTypeHoneycomb)
+@property (nonatomic, assign) MAHeatMapType type;
+
+///option选项是否可见. (默认YES)
+///Whether the option is visible. (Default: YES)
+@property (nonatomic, assign) BOOL visible;
+
+///MAHeatMapVectorNode array
+@property (nonatomic, strong) NSArray<MAHeatMapVectorNode *> *inputNodes;
+
+/**
+ @verbatim
+ 节点的宽 单位：米 负数按照0处理 default 2000
+     —— ——    —— ——
+   丨     丨 丨     丨
+   丨     丨 丨     丨
+     —— ——    —— ——
+ 
+ 每个方框的宽就是 size（六边形同理）
+ 两个方框之间的间隔就是 gap （六边形同理）
+ @endverbatim
+ */
+/**
+ @verbatim
+ Node width in meters (negative values treated as 0, default 2000)
+     —— ——    —— ——
+   丨     丨 丨     丨
+   丨     丨 丨     丨
+     —— ——    —— ——
+ 
+ The width of each box is size (same for hexagons)
+ The gap between two boxes is gap (same for hexagons)
+ @endverbatim
+ */
+@property (nonatomic, assign) CLLocationDistance size;
+
+///节点之间的间隔 单位：米 负数按照0处理。注意：改变gap可能会改变热力节点的计算，内部会用size+gap来计算热力，最终用size来画方框。
+///The spacing between nodes, unit: meters, negative values are treated as 0. Note: Changing the gap may alter the calculation of heat nodes; internally, size + gap is used to calculate the heat, and finally, size is used to draw the box.
+@property (nonatomic, assign) CGFloat gap;
+
+///颜色变化数组。 注意：colors和startPoints两数组长度必须一致且不能为0，
+///Color gradient array. Note: The lengths of the colors and startPoints arrays must be equal and cannot be 0.
+@property (nonatomic, strong) NSArray<UIColor *> *colors;
+
+///颜色变化起点，需为递增数组，区间为[0, 1]。 注意：colors和startPoints两数组长度必须一致且不能为0。例如：startPoints @[@(0), @(0.3),@(0.7)] 表示区间 [0,0.3)使用第一个颜色，区间[0.3,0.7)使用第二个颜色，区间[0.7,1]使用第三个颜色。注意：startPoints首位需设置成0，如果首位不是0，内部也会把首位当成0来处理。
+///The starting point of color change must be an increasing array within the range [0, 1]. Note: the lengths of the colors and startPoints arrays must be the same and cannot be zero.For example: startPoints @[@(0), @(0.3),@(0.7)] means the interval [0,0.3) uses the first color, the interval [0.3,0.7) uses the second color, and the interval [0.7,1] uses the third color.Note: The first element of startPoints must be set to 0. If it is not 0, the system will treat the first element as 0 internally.
+@property (nonatomic, strong) NSArray<NSNumber *> *startPoints;
+
+///透明度，取值范围[0,1] ，default为1不透明
+///Transparency, value range [0,1], default is 1 for opaque
+@property (nonatomic, assign) CGFloat opacity __attribute((deprecated("Deprecated, since 7.9.0, please use alpha in MAHeatMapVectorOverlayRender")));;
+
+///权重的最大值，default为0，表示不填，不填则取数组inputNodes中权重的最大值
+///Maximum weight, default is 0, indicating not filled, if not filled, the maximum weight in the array inputNodes is taken
+@property (nonatomic, assign) int maxIntensity;
+
+///最小显示级别 default 3
+///Minimum display level, default 3
+@property (nonatomic, assign) CGFloat minZoom;
+
+///最大显示级别 default 20
+///Maximum display level, default 20
+@property (nonatomic, assign) CGFloat maxZoom;
+
+@end
+
+///矢量热力图，支持类型详见MAHeatMapType
+///Vector heatmap, supported types refer to MAHeatMapType
+@interface MAHeatMapVectorOverlay : MAShape<MAOverlay>
+
+///热力图的配置属性
+///Configuration properties of heatmap
+@property (nonatomic, strong) MAHeatMapVectorOverlayOptions *option;
+
+/**
+ * @brief 根据配置属性option生成MAHeatMapVectorOverlay
+ * Generate MAHeatMapVectorOverlay based on configuration attribute option
+ * @param option 热力图配置属性option
+ * Heatmap configuration attribute option
+ * @return 新生成的热力图MAHeatMapVectorOverlay
+ * Newly generated heatmap MAHeatMapVectorOverlay
+ */
++ (instancetype)heatMapOverlayWithOption:(MAHeatMapVectorOverlayOptions *)option;
+
+@end
+
+#endif