新增景区权限模块，集成 AMap CocoaPods 并支持模拟器

将景区选择与权限申请流程接入首页路由，集成高德 SDK 用于真机构建，并通过 Podfile post_install 钩子保证 arm64 模拟器可编译。

Co-authored-by: Cursor <cursoragent@cursor.com>

Pods/AMap3DMap-NO-IDFA/MAMapKit.framework/Headers/MAAnnotationView.h

@@ -0,0 +1,140 @@
+//
+//  MAAnnotationView.h
+//  MAMapKitDemo
+//
+//  Created by songjian on 13-1-7.
+//  Copyright © 2016 Amap. All rights reserved.
+//
+
+#import "MAConfig.h"
+#import <UIKit/UIKit.h>
+#import "MACustomCalloutView.h"
+
+///MAAnnotationView拖动状态
+///MAAnnotationView drag state
+typedef NS_ENUM(NSInteger, MAAnnotationViewDragState)
+{
+    MAAnnotationViewDragStateNone = 0,      ///< 静止状态   stationary state
+    MAAnnotationViewDragStateStarting,      ///< 开始拖动   start dragging
+    MAAnnotationViewDragStateDragging,      ///< 拖动中   dragging
+    MAAnnotationViewDragStateCanceling,     ///< 取消拖动   cancel dragging
+    MAAnnotationViewDragStateEnding         ///< 拖动结束   end dragging
+};
+
+@protocol MAAnnotation;
+
+///标注view
+///annotation view
+@interface MAAnnotationView : UIView
+
+///复用标识
+///reuse identifier
+@property (nonatomic, readonly, copy) NSString *reuseIdentifier;
+
+///z值，大值在上，默认为0。类似CALayer的zPosition。zIndex属性只有在viewForAnnotation或者didAddAnnotationViews回调中设置有效。
+///z-value, larger values on top, default is 0. Similar to CALayer's zPosition. The zIndex property only takes effect when set in the viewForAnnotation or didAddAnnotationViews callbacks.
+@property (nonatomic, assign) NSInteger zIndex;
+
+///关联的annotation
+///associated annotation
+@property (nonatomic, strong) id <MAAnnotation> annotation;
+
+///显示的image
+///Displayed image
+@property (nonatomic, strong) UIImage *image;
+
+///image所对应的UIImageView since 5.0.0
+///UIImageView corresponding to the image.   since 5.0.0
+@property (nonatomic, strong, readonly) UIImageView *imageView;
+
+///自定制弹出框view, 用于替换默认弹出框. 注意:此弹出框不会触发-(void)mapView: didAnnotationViewCalloutTapped: since 5.0.0
+///Custom pop-up view, used to replace the default pop-up. Note: This pop-up will not trigger -(void)mapView: didAnnotationViewCalloutTapped: since 5.0.0
+@property (nonatomic, strong) MACustomCalloutView *customCalloutView;
+
+///annotationView的中心默认位于annotation的坐标位置，可以设置centerOffset改变view的位置，正的偏移使view朝右下方移动，负的朝左上方，单位是屏幕坐标
+///The center of the annotationView is by default located at the coordinate position of the annotation. You can set the centerOffset to change the position of the view. A positive offset moves the view towards the lower right, while a negative one moves it towards the upper left, with units in screen coordinates.
+@property (nonatomic) CGPoint centerOffset;
+
+///弹出框默认位于view正中上方，可以设置calloutOffset改变view的位置，正的偏移使view朝右下方移动，负的朝左上方，单位是屏幕坐标
+///The pop-up box is by default located above the center of the view, and the position of the view can be changed by setting calloutOffset. A positive offset moves the view to the lower right, and a negative offset moves it to the upper left, in screen coordinates.
+@property (nonatomic) CGPoint calloutOffset;
+
+///默认为YES,当为NO时view忽略触摸事件
+///Default is YES, when NO the view ignores touch events
+@property (nonatomic, getter=isEnabled) BOOL enabled;
+
+///是否高亮
+///Whether to highlight
+@property (nonatomic, getter=isHighlighted) BOOL highlighted;
+
+///设置是否处于选中状态, 外部如果要选中请使用mapView的selectAnnotation方法
+///Set whether it is in the selected state. To select externally, use the selectAnnotation method of mapView
+@property (nonatomic, getter=isSelected) BOOL selected;
+
+///是否允许弹出callout
+///Whether to allow callout to pop up
+@property (nonatomic) BOOL canShowCallout;
+
+///显示在默认弹出框左侧的view
+///The view displayed on the left side of the default popup
+@property (nonatomic, strong) UIView *leftCalloutAccessoryView;
+
+///显示在默认弹出框右侧的view
+///the view displayed on the right side of the default popup
+@property (nonatomic, strong) UIView *rightCalloutAccessoryView;
+
+///是否支持拖动
+///whether dragging is supported
+@property (nonatomic, getter=isDraggable) BOOL draggable;
+
+///当前view的拖动状态
+///the dragging state of the current view
+@property (nonatomic) MAAnnotationViewDragState dragState;
+
+///弹出默认弹出框时，是否允许地图调整到合适位置来显示弹出框，默认为YES
+///whether the map is allowed to adjust to a suitable position to display the popup when the default popup is displayed, default is YES
+@property (nonatomic) BOOL canAdjustPositon;
+
+///是否开启碰撞检测，默认为NO。开启后标注会在地图缩放和密集显示时进行碰撞检测，避免重叠显示
+///Whether to enable collision detection, default is NO. When enabled, annotations will perform collision detection during map zooming and dense display to avoid overlapping display
+@property (nonatomic) BOOL isOpenCollisionDetection;
+
+/**
+ * @brief 设置是否处于选中状态, 外部如果要选中请使用mapView的selectAnnotation方法
+ * Set whether it is in the selected state, if you want to select it externally, use the selectAnnotation method of mapView
+ * @param selected 是否选中
+ * whether it is selected
+ * @param animated 是否使用动画效果
+ * whether to use animation effects
+ */
+- (void)setSelected:(BOOL)selected animated:(BOOL)animated;
+
+/**
+ * @brief 初始化并返回一个annotation view
+ * Initialize and return an annotation view
+ * @param annotation      关联的annotation对象
+ * associated annotation object
+ * @param reuseIdentifier 如果要重用view,传入一个字符串,否则设为nil,建议重用view
+ * if you want to reuse the view, pass a string, otherwise set it to nil, it is recommended to reuse the view
+ * @return 初始化成功则返回annotation view,否则返回nil
+ * Returns the annotation view if initialization is successful, otherwise returns nil
+ */
+- (id)initWithAnnotation:(id <MAAnnotation>)annotation reuseIdentifier:(NSString *)reuseIdentifier;
+
+/**
+ * @brief 当从reuse队列里取出时被调用, 子类重新必须调用super
+ * Called when taken out of the reuse queue, the subclass must call super
+ */
+- (void)prepareForReuse;
+
+/**
+ * @brief 设置view的拖动状态
+ * set the drag state of the view
+ * @param newDragState 新的拖动状态
+ * the new drag state
+ * @param animated     是否使用动画动画
+ * whether to use animation
+ */
+- (void)setDragState:(MAAnnotationViewDragState)newDragState animated:(BOOL)animated;
+
+@end